Kiln Firing

I offer onsite kiln firing in my Skutt 1018 electric kiln (oxidation). Pieces must be made with Cone 5/6 (mid-fire) clay, and only pre-approved glazes are permitted.

If you’re curious, I’m also happy to share a little of the “why” behind the process — how clay bodies and glazes (earth materials!) behave as they heat, sinter, and melt into a finished surface — without turning it too much into a ceramic materials/geology lecture!

One half shelf (regardless of weight, up to 7″ tall) — $20
One full shelf (regardless of weight, up to 7″ tall) — $38
Full kiln — $80

Shelf note: “Half shelf” and “full shelf” are based on my kiln furniture and layout. I’ll confirm shelf assignment at drop-off.

• Mid-fire clay only: Cone 5–6 clay bodies
   
• Glazes must be approved before firing (brand + glaze name, or your recipe)
   
• No low-fire earthenware and no unknown materials
   

• Bisque loads: work must be bone dry at drop-off
   
• Glaze loads: clean bottoms required — wipe glaze at least ¼″ above the foot; use cookies if you’re unsure
   
• Please label your pieces clearly with your name
   

I fire using my standard, reliable schedules. If you book a full kiln, you may request a firing schedule (within reason).

Turnaround is typically 1–2 weeks, depending on the firing queue.

• Glaze drips / damage: any glaze that runs onto shelves or kiln furniture may incur a cleanup/repair fee
   
• Drop-off and pickup are by appointment